5
WARNING:
Never combine the blender jug and the holder without
the blade. Without the blade the bottom of the blender jug is open.
Liquids could spill and might damage the motor block.
Without the blender jug, the appliance will not operate.
Important:
Ensure the blender jug is locked securely onto the motor
block and that you cannot knock the appliance over during operation.
The motor will not start before the plug is plugged into the power outlet,
the blender jug is securely locked onto the motor block and the appli-
ance is switched ›On‹.
• As a safety feature, the appliance should shuts off after operating for
1 minute. If you want to operate again, wait 1 minute and then con-
tinue.
WARNING:
Do not overfill the blender jug. If necessary, take some
food out of the blender jug, using a wooden or plastic spoon, before
starting the appliance again.
WARNING:
Do not operate the appliance when the blender jug has
a crack or any part of it is likely to be damaged. The appliance is like-
ly to be damaged if the appliance was subject to inadmissible strain
(i.e. overheating, mechanical, or electric shock) or if there are any
cracks, excessively frayed parts, distortions or the motor stalls or gets
stuck. In this case, immediately unplug the appliance and return the enti-
re appliance (including all parts and accessories) to an authorised ser-
vice centre for examination and repair.
WARNING:
Do not fill ingredients into the blender jug which exceed
a temperature of 60 degrees. After processing ice cubes slowly heat up
the blender jug before processing hot ingredients. Otherwise the blen-
der jug will crack or get damaged. Use gloves processing hot liquids
and do not fill the blender jug up too high. Ensure not to burn yourself
on the blender jug, overrunning, and spurt out or hot steam.