12
PREPARATION
BEFORE FIRST USE
Before first use and after prolonged storage period, clean the mixing jug in warm
soapy water and then dry thoroughly (see: ›Care and Cleaning‹).
ASSEMBLING THE BLENDER JUG
1. Put the sealing ring on the inner edge of the blade unit.
2. Put the blade unit with sealing ring into the cup base.
3. Mount the cup base under the base of the blender jug and turn the cup base
clockwise until it is fixed.
4. Mount the cup with the beaker onto the blender jug.
5. Place the beaker into the lid and close the blender jug with the lid.
INSERTING THE BLENDER JUG
1. Make sure that the blender is switched off (Switch in the ›0‹ setting).
2. Place the blender jug on the motor base. The mixer operates only with mounted
blender jug. If you remove it during operation the mixer stops automatically.
OPERATION
GENERAL INFORMATION
Important:
It is recommended that, this product should not exceed 1 minute in
operation and allow 1 minute break in between each use.
Keep the workplace during work clean and dry. If necessary, wipe off splashes or
spilled liquids with a dry cloth.
WARNING:
Never place the motor base on wet underlayments or towels.
Never let fluids run under or onto the motor base. If liquids have entered into the
motor base, then immediately pull the power plug from the outlet, and have the
applaince checked at a specialised service centre.
