![background image](http://html1.mh-extra.com/html/gastroback/60999/60999_operating-instructions-manual_3745007018.webp)
18
STORAGE
Assemble the blender jug for storage completely and correctly to avoid injury from
the blade and loss of parts. Place the blender jug onto the socket of the motor base.
In this way, the sealing ring, the knives and the drive wheel are protected best
against dirt and damage.
WARNING:
Never place the bottom of the jug or the knives without the blen-
der jug on the motor base.
Important:
Do not let the power cord slide across the floor and make sure that the
power cord does not hang or can be caught.
Store the appliance in a clean and dry place, where it is protected from excessive
loads (impact, shock, dirt, humidity) and inaccessible to small children. Do not place
hard or heavy objects on the appliance. The storage location should be protected
from frost and not be warmer than 40 °C.
TROUBLESHOOTING
The Vital Mixer is reliable and robust and will work smoothly usually when operated
properly. However, should a problem occur, you will able quite easily to eliminate
this in most cases. The following error table is intended to assist.
WARNING:
Do not attempt to use this appliance for any other than the inten-
ded use, described in these instructions. Maintenance and repair of the appliance
must be performed only by an authorized service centre. Do not use the appliance
when it is probably damaged or is not working as expected.
Problem
Solution
The motor stops
during operation
or can not be
turned on again.
Switch off the appliance immediately (turn the ON/OFF switch to position ›0‹), when the
motor stops unexpectedly or is stuck to prevent overheating. Then, check the following
points:
The motor operates only when the blender jug is properly and fully assembled. Make
sure that the blender jug is properly assembled.
Remove the blender jug from the motor base and clear gently with a wooden or plastic
spoon stuck pieces of food on the blade. Apply no violence not to damage the blades.
Shred hard ingredients outside of the mixer. Remove a part of the ingredients from the
blender jug and then try again with a higher speed level.
Attention:
Do not overload the motor of the appliance with too hard or too large ingredients.
Do not over load the blender jug. Process solid ingredients possibly in several steps.