Gastroback 42711 S, Руководство по эксплуатации

Страница: 66 / 100

66
Button Function Possible Values
Hours
Selecting the hours when setting the internal clock or the starting time for timer ope-
ration (see: ‘Integrated Timer’ and ‘Brewing Coffee / Setting the Starting Time’).
0 to 23
Minutes
Selecting the minutes when setting the internal clock or the starting time for timer ope-
ration (see: ‘Integrated Timer’ and ‘Brewing Coffee / Setting the Starting Time’).
00 to 59
INFORMATION SHOWN ON THE DISPLAY AREA
Parameter Bedeutung
24 hours clock
In the upper line of the display area, the current time is shown. After holding the timer button
pressed for some seconds, the display is toggled to the starting time of the timer. While the starting
time is flashing on the display, you can adjust the starting time via the hours button or minutes but-
ton. When no button is pressed for more than 2 seconds, the appliance switches back to the clock.
Timer icon
After activating the timer, the timer icon appears at the right side of the time and the timer but-
ton is illuminated red.
Number of cups
The number of cups is shown on the left side under the time. Via the cups button, you may select
any desired value offered by the coffee maker (2, 4, 6, 8). There is no restriction to this setting,
and you do not need to adjust this value according to the filling of the water tank. However,
keep in mind that this value will determine the amount of coffee powder that will be ground, thus
effecting the strength of your coffee.
Strength icons
Below the time, the selected strength setting of your coffee is shown via an appropriate coffee
bean icon: mild (contours), medium (dotted), strong (filled). The grinder gives off the appropriate
amount of coffee powder.
Cup icon
This icon at the bottom right corner of the display area indicates that a brewing cycle has been star-
ted (manually or via the timer).
MEMORY FUNCTION
As long as the appliance is live without interruption, every entry you made on the
control panel is kept within the memory of the appliance—even after the automatic
shut-off, when only the on/off button is illuminated.
Any interruption of the power supply (e.g. power failure, for cleaning or storing)
deletes your settings. Only the grind size, set via the adjusting dial on top of the
brewing head, is kept (see below: ‘Setting the Grind Size’). When reactivating the
appliance, any other value is reset to factory settings.
IMPORTANT -
Before starting a brewing cycle, via a glance at the control panel
ensure that your preferred settings are still active.