Gastroback 42711 S, Руководство по эксплуатации

Страница: 65 / 100

65
gned function. Therefore, the control panel is a smooth surface that can effortlessly
be cleaned hygienically.
IMPORTANT -
When the appliance reacts only unwillingly to your touch, the skin
of your fingers may be too dry or fatty. Moisten your finger a little and try again
(see: ‘Solving Problems’).
Acoustic Signals
• The appliance responds to each successful input at the control panel with a beep.
• When operated via the timer, reaching the set starting time and starting the
brewing cycle is accompanied by an acoustic signal.
• A signal sounds as soon as a brewing cycle is complete and the coffee is rea-
dy for consumption. Automatically, the appliance switches off (see: ‘Automatic
Shut-Off’).
The Functions of the Buttons
Button Function Possible Values
Timer
Controlling the timer function (see: ‘Internal Timer’).
– a short touch activates or deactivates timer operation.
– holding your finger for some seconds on the button switches to showing or setting the
starting time of the timer. With the timer activated, the starting time will be shown only.
While the timer is de-activated, the starting time flashes and can be adjusted.
on, off, setting or
displaying the starting
time
Cups
Setting the number of cups to be brewed. Usually, this value should correspond to
the amount of water you filled into the water tank. However, in combination with
the strength button, you can adjust the strength of your coffee via this setting.
2, 4, 6, 8
Grinder
Switching the grinder off or on.
IMPORTANT: Do not forget to switch off the grinder via this button, after filling the
filter with pre-ground coffee powder! The grinder is de-activated, when the button is
illuminated red.
off, on
Strength
Controlling the amount of coffee powder the grinder will give off just before the
brewing cycle. This button is only affective, when using the grinder (grinder button is
illuminated white).
strong, medium, weak
On/Off
With the control panel dark: switching on the appliance.
With the control panel on and this button illuminated white: starting the brewing cycle.
With this button illuminated red: cancelling any running function.
IMPORTANT: You cannot switch off the touchscreen. This is done via the automatic shut-
off (see: ‘Automatic Shut-off’).
on,
start,
cancel