EN
37
STEAM OUTLET
The steam outlet is located in the center of the lid.
WARNING
– The lid of the steam outlet gets very hot during operation.
First, turn off the appliance, unplug the power cord from the outlet and let the appli-
ance cool down before opening the steam outlet.
ATTENTION
– In the lid of the steam outlet a seal is inserted. Never scratch
or poke with pointed or sharp objects under the edge of steam outlet. Be careful
not to damage the seal.
To open and close the steam outlet lid:
1. Grasp, with appliance lid closed, with the index finger in the recess at the steam
outlet. Then turn the lid of the steam outlet with the other hand gently a little bit
counterclockwise until the steam outlet lid can simply be lifted .
2. Check that the seal is correctly inserted inside the edge of the lid of the steam
outlet. If the seal is deformed, cracked or crusty, then replace the seal.
3. Dry after operation of the device, the inner sides of the steam outlet. The lid of
the steam outlet can be cleaned in warm soapy water with a soft cloth and then
dry. Set the lid back on the steam outlet.
NOTE
The steam outlet lid can be inserted only in one direction. If the separator lid is pro-
perly inserted and locked, then the slot of the steam opening shows to rear panel
and the steam outlet lid does not extend beyond the control cover.
4. To lock the steam outlet lid, turn it a bit clockwise. Do not apply any violence,
making sure not to dislodge the steam outlet lid.
Never operate the appliance without the separator lid!
