![Gastroback 41409 Скачать руководство пользователя страница 16](http://html.mh-extra.com/html/gastroback/41409/41409_operating-instructions-manual_568910016.webp)
30
31
IMPORTANT SAFEGUARDS
Carefully read all instructions, before operating this appliance and
save for further reference.
Do not
attempt to use this appliance in
any other way and for any other purpose, than described in these instructions
(intended use). Any other use, especially misuse, can cause severe injuries or
damage by electric shock, heat, or fire.
These instructions are an essential part of the appliance. Do not pass the
appliance without this booklet to third parties. Any operation, repair and
technical maintenance of the appliance, line cord or any part of it other than
described in these instructions may only be performed at an authorised ser-
vice centre (see: ‘Warranty’). Please contact your vendor.
Never leave the
appliance unattended when in operational mode.
GENERAL SAFETY INSTRUCTIONS
This appliance is for household use only and NOT intended for use in moving
vehicles.
Do not
operate or store the appliance in humid or wet areas or
outdoors. Always keep the appliance where it is dry, frost-free, and clean.
Do not attempt to operate the appliance using any parts or accessories not
recommended by the manufacturer to avoid injuries and damage due to
overheating, fire, and/or electric shock.
The mincer is used for mincing meat (uncooked or cooked) and soft vegeta-
bles. Please prepare the ingredients before filling them into the feed chute.
Using the pusher you press the food slowly into the worm which pushes it
against the spinning crossed-blade knife.
The knife and the worm are driven by a 350 watt induction motor (max. 1,28
Nm). The finished mince discharges through the grinding disc. The appliance
has an overload protection which prevents the motor from overheating.
The appliance is maintenance-free, very insusceptible and easy to use. All parts
that come into direct contact with food are easily to remove and easy to clean.
No extra tools are necessary for assembling or disassembling the appliance.
ATTENTION: Always ensure that the appliance is turned off (the con-
trol switch should be in STANDBY position) before connecting the plug
to the power outlet.
•
Never assemble or disassemble crossed-blade knife, worm or grinding disc
when the plug is connected to the power outlet to avoid personal injury.
• Before first use rinse all the parts of the appliance with water that come
into contact with food and clean them with dishwashing detergent.
Note:
The display is illuminated only when the plug is connected to the power outlet.
The appliance will turn on only when the plug is connected to the power outlet.
ATTENTION:
To avoid damage, do not use any abrasive cleaners, corro-
sive chemicals (i.e. disinfectants, bleach) or cleaning pads for operation or
cleaning. Never clean or operate the appliance or parts of the appliance
with abrasive or hard sharp-edged items.
Never put the motor housing or
the accessories in the dishwasher for cleaning! This will cause discoloura-
tion and corrosion and damage the motor.
• To avoid personal injury always turn the appliance off by turning the control
switch to STANDBY, wait for the motor to stop completely and pull the plug
before assembling or disassembling, cleaning or moving the appliance.
• While proceeding do not push the pusher too hard down to avoid blo-
cking the motor. Only use the provided pusher to guide food through the
feed chute.
• The mincer cannot mince hard or stingily ingredients (for example: bones,
nuts, ginger). If you use hard ingredients like onions or carrots, you have
to steam them before adding them to the meat otherwise they can block
the motor.
• The mincer has an overload protection. When the overload protection
automatically turns the appliance off or when the appliance continues to
function but no meat comes out of the cutting plate due to jamming of
bones or other material, turn the appliance off and wait a few minutes to
allow the motor to cool down.
• Never put fingers, wooden spoons or other foreign objects (such as hair,
clothing, brushes, cloths) into the feed chute or the holes of the grinding
disc when the appliance is plugged into the power point. Always ensure
that there are no foreign objects (such as bones, stems of vegetables or
wooden spoons) in the feed chute before turning on the appliance. Only
use the provided pusher to push food through the feed chute. Never hold
your face or other body parts over the feed chute when the motor is run-
ning because little pieces of food could be thrown out of the feed chute.