Gaspardo PA2, Использование и обслуживание

Страница: 65 / 196

USE AND MAINTENANCE
ENGLISH
g
65 cod. G19503380
8) Montare posteriormente all’’attacco tre punti dell’erpice rotante il guida tubi per il trasporto semi (Fig.31).
4.1.3 REAR EQUIPMENT (PA2 - FERTILIZANT)
1) Assemble the fertiliser distributor with the flexible tubes and
with the central tubing at the centre of the precision planting
unit if possible (see the Spare Parts manual).
2) Connect the flexible tubes from the distributor to the
fertilisation parts using the special hose-clips.
3) The machine in the correct operating position, check the
length of the descent pipes: while the machine is operating,
it is important to avoid folds and bends in the pipes which
can lead to their breaking. Adapt them, if necessary, by varying
the length as shown in Figure 29.
fig. 32
B
A
B
CENTAURO
500 / 600
CENTAURO
400 / 450
fig. 31
4.1.4 CENTRAL CONNECTION
The manufacturer provides a 150 mm diameter rigid tube for
fitting to the tractor (A, Fig. 32). Connect both ends of the rigid
tube to the machinery mounted back and front with the flexible
tube (B, Fig. 32). Avoid creases and folds that could lead to
breakage (Fig. 29).