USE AND MAINTENANCE
ENGLISH
24
-
cod. G19502283
5.4.2 HOW TO CHECK SPEED SENSOR FOR FUNCTIONING
"& >
;[ ) X
ON/OF
F>-key), to attend that the
&
5.5 FUNCTIONING MODE
5.5.1 STANDARD USE
& X
V <<[
below.
) "
2) Using a screwdriver or other metal mass, pass over the red part
speed (which probably will not be constant) it means that the
5.4.3 HOW TO CHECK PHOTOCELLS FOR FUNCTIONING
"& >
=!!^$|)="!^+``& -
sed and, while holding this button down, switch on the monitor
|:`` X"[
“tEst” will appear.
The monitor will run a test that lasts about 2.5 seconds, switching
^+ \
% <_
Also, as soon as it is switched on, it will automatically carry out
^+X*[ '
X {[
& '
the monitor are those that should actually be sowing, because the
&
In the non-recognized rows, the sowing control will not be carried
X [ X '
and non-recognized) can always supply battery voltage to the
their connector contact, as they are non-electronically managed.
= &
* & &
working parameters, such as the seed planting distance (
d
) to which
the seed drill is set, inter-row width (
L
), sowing control sensitivity
(
S
), understood as the tolerance allowed on seeding variability
(expressed in percentage; the higher the set value, the less rigo-
[ X
C
) read by the
speed sensor over a hundred metres covered (see Programmable
Parameters paragraph).
During the work, the monitor compares the seed planting distance
set in parameter (d) with the one calculated through the data coming
X [
in one or more rows not being the same, also taking into account
the set sensitivity (parameter
S
), the monitor will report this as
described in the next paragraph.
SEEDER MONITOR
MCE 6000-12000
starts the stored row control phase.
&
X)[^+=
^+
&
^+
-
table, gradually increase the sensitivity number (parameter “S”)
^+
C
C
J
-
Simulated test
:
#
;\
correctly it will send pulses to the monitor, which will emit an
^+
is connected.
= #
photocell: the LED will go out and the sound will also stop.
Repeat the test with the next photocell.
N.B.
: N.B.: between one test and the next, it is important to wait
^+
Execute this operation on each photocell.
-
Real test
:
(
\
(
Содержание MCE 6000
