16
The next step would be to configure the telemetry settings on the radio. This step is also
crucial because every measure has a name and a personal ID. If the name or the Id does
not match it won’t work properly.
There are two ways to configure the radio telemetry settings. One is using the third-
party software Companion (make sure that Companion’s version matches the OpenTx
version loaded on the radio) the other option would be manual configuration.
If you decide to use Companion. Open the Xicoy_Telemetry5.otx file with it and then
double click the preset model, a window will appear, open the telemetry menu and
something like the following image should appear:
These are how the telemetry settings have to look like. Sensor name, Id and Instance
must match these values, otherwise it won’t work. At the end of the file you should have
it like this:
