4
Electrical connections:
Except the Spektrum unit, the adapter has a 2-wire lead finished in a 3 position JR
connector to be connected on the RX socket “EXT” on Jeti Receivers, “Sensor” on MPX
receivers, “T” on HoTT and “SBUS2” on Futaba receivers, Smart Bus on FrSky receivers
and P
2
-Bus on PowerBOX-CORE receivers. Brown lead oriented to negative pin. Please
note that on Spektrum systems, you need to purchase the TM1000 module and the
connection lead SPMA9579 to your spectrum dealer, the Spektrum receivers don’t have
a telemetry input like other brands.
On the other side of the adapter there is a connector for a JR connector that should be
connected to the fadec at the data terminal port, using the provided lead. The adapter
is powered from the fadec, no power is taken from receiver.
The adapter has 2 small LED lights to show its working status, one green and one red.
The green led blinks to confirm that there is traffic from ecu to adapter, and the red led
blinks to signal the traffic from the adapter to the receiver (except on Spektrum
systems).
Picture 1
