Safety
5
Safety
Gason rate operator Safety as one of the high-
est priorities when designing new features and
machines. Every effort is taken to consider the
end user and the safety risks they may face.
Accidents can Disable & Kill
Accidents are Costly
Accidents Can be Avoided
Safety Alert Symbol
The Safety Alter Symbol
means:
ATTENTION!
BECOME ALERT!
YOUR SAFETY IS INVOLVED!
The Safety Alert Symbol identifies important
safety messages applied to the Implement in
this manual. When you see this symbol, be alert
to the possibility of injury or death. Follow the
instructions provided on the safety messages.
Throughout this Manual the Safety Alert Symbol
will be seen followed by one of the words.
Signal Words
DANGER: indicates an imminently hazardous sit-
uation that, if not avoided, WILL
result in death
of serious injury if proper precautions are not
taken.
WARNING: Indicates a potentially hazardous sit-
uation that, if not avoided, COULD result in
death or serious injury if proper precautions are
not taken
CAUTION: Indicates a potentially hazardous situ-
ation that, if not avoided, MAY result in minor or
moderate injury if proper precautions are not
taken, or, serves as a reminder to follow appro-
priate safety practices.
Содержание NT8000
