Safety
7
Caution: For transportation on public
roads the operator must ensure that the tractor
and Implement complies with current state and
federal laws and must strictly adhere to all road
traffic regulations.
Warning: Use Extreme care and reduce
ground speed on slopes and rough terrain.
Warning: DO NOT transport implement in
excess of 20km/h.
Warning: DO NOT exceed 10° roll angle
with wings folded.
Caution: Always double check before re-
versing machine.
Danger: Never place any part of the body
underneath tines. Hydraulic systems can
“creep” (i.e. slowly lower). Any movement of
the control levers can cause the implement to
drop or move unexpectedly causing severe in-
jury or death.
Warning: DO NOT adjust Hydraulic fitting
while under pressure. Ensure pressure is re-
leased using tractor’s hydraulic system before
adjusting or disconnecting Implement.
Warning: Never remove hydraulic hoses or
ends with machine elevated. Relieve hydraulic
pressure before disconnecting hydraulic hoses
or ends.
Caution: Maintain sufficient hydraulic fluid
levels to ensure air is not introduced into the
system.
Caution: Keep all connectors clean for pos-
itive connections.
Caution: Ensure all fittings and hoses are
in good condition.
Disclaimer
Gason accepts no responsibility or liability for any losses, injuries or damages
that may result from failing to observe these safety rules and the safety decals
on the Implement.
Содержание NT8000
