Gason NT8000, Руководство оператора и каталог запасных частей

Страница: 8 / 63

Introduction
4
Dealer Pre-Delivery & In-Field Commissioning Check List
The following must be carried out upon machine delivery to customer
Tick to confirm action √
Customer has ensured that Machine is correct for the required application.
Customer has checked tractor specification to ensure machine is suited to tractor.
Customer has checked all items are received as per order.
Machine Assembled Correctly as per Operators Manual instructions.
Check Wheel Nuts for correct torque (refer maintenance section)
Tyre Pressures are correct as recommend.
Grease all grease nipples; hinges and wheel assembly pivots.
Check for Hydraulic Oil leaks.
Air purged from Hydraulic Circuits and tractor’s hydraulic oil level is OK.
Ensure Depth Control cylinders are phasing correctly (synchronized).
Ensure Machine is level front to rear
at working depth
.
Ensure Machine is level across the width.
Ensure lock nuts on depth control adjustment are locked tight.
Check for correct tractor to tow bar connection.
Implement safety chain fitted to tractor.
Ensure all shanks and press wheels set at consistent settings across machine, (If prac-
tical set machine to operator’s initial operation settings).
Check Air Seeder Distribution for kinks and obstruction through all working ranges
(where applicable).
Check row spacing is correct. (At initial operation, drive in straight line, lightly scratch-
ing machine along flat ground. Measure distance between marks).
Owner has viewed the Operators Manual.
Owner instructed on correct maintenance and safe operation of machine.
Owner and operators instructed on phasing cylinders depth stop use and
Owner and operators instructed to fully extending wing fold cylinders when operating.
Owner has agreed to train all operators in the safe use of the machine.
Pre delivery and in field commissioning by:
NAME:
DATE:
SIGNED: