3
2
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
BEFORE FIRST USE
• Read and follow all the instructions below even if you
feel you are familiar with the heater.
• Remove the packing and make sure that the heater is
intact. If in doubt do not use the heater and contact
the place of purchase.
• Do not leave packaging materials such as bags and
staples within reach of children.
• Dispose of packaging carefully and with consideration
for the environment.
• It is ideal to retain the heater carton for seasonal
storage.
For your convenience record the date you received the
heater on the warranty page of these instructions, and
attach your proof of purchase. Retain this information in
the event that a warranty service is required.
NOTE:
The rating of this heater (as marked on the rating
label) is based on specific loading tests. Normal use or
the use of other recommended attachments may draw
significantly less power.
IMPORTANT SAFETY INFORMATION
Before attempting to operate this heater, the following
basic safety precautions should be taken to reduce
the risk of fire, electric shock and personal injury. It
is important to read the instruction manual and to
understand its’ applications, limitations and potential
hazards associated with this heater.
• Do not locate in areas of high foot traffic, ensure
the power cord and heater are in view to avoid
accidents.
• Do not operate in areas where gasoline, paint or
other flammable liquids are used or stored.
• This heater heats up when in use. To avoid burns,
do not touch the front of the heater or any of the
grilles or vents.
• Before moving the heater, switch off the heater by
unplugging it from the wall and allowing it to cool.
• Do not use the heater to dry clothes.
• Do not insert or allow foreign objects or metal
utensils into any ventilation or exhaust openings
as this may cause an electric shock, fire or
damage to the heater.
• Do not use this heater in the immediate
surroundings of a bath, a shower or a swimming
pool.
• Do not immerse in liquid or use the heater within
1m or above a water source as this could create
an electrical shock hazard.
• If the heater accidentally comes into contact with
water switch off the power supply and do not
touch the heater.
• Do not operate any heater with a damaged cord
or plug or after the heater malfunctions or has
been dropped or damaged in any manner – in
order to avoid a hazard. Return to a qualified
electrical person for service or repair.
• Do not operate the heater with wet hands.
• Do not connect the heater to the mains voltage
until completely assembled and adjusted.
• Always operate level, on a flat surface only.
• Unroll the cord before operating. Operating with a
coiled cord may cause overheating and fire risk.
• This heater is NOT designed to run off an
extension cord. If you require an additional power
point please have one installed by a qualified
electrician.
• Do not remove the plug from the power socket
until the heater has been switched off.
• The use of extension cords may cause power
voltage loss which will result in damage to the
heater this will NOT be covered under warranty.
• Always hold the plug when removing it from the
wall, do not pull the cord.
• Always unplug the heater when it is not in use.
• Do not allow the cord to come in to contact with
the heater surface during operation.
To reduce the risk of fire, electrical shock or injury to
persons or property:
• To avoid overheating, keep airflow grilles clear
of dust and hair build up - especially if you have
pets.
• Use only the voltage specified on the rating label
of the heater.
• Do not cover or restrict airflow to the inlet or outlet
grilles in any manner as the heater may overheat
and become a fire risk.
• Do not cover grilles, block entry or exits of airflow
by placing the heater against any surface. Keep
all objects at least 1 metre from the front, side and
rear of the heater.
WARNING:
DO NOT
COVER IN ORDER TO AVOID
OVERHEATING.
Содержание GM135-045
Страница 7: ...7...
