Gasmate GM135-045, Руководство пользователя

Страница: 6 / 8

7 6
• Heater must not be located immediately below a
socket outlet.
• Heater must not be located in front of a socket
outlet.
IMPORTANT
POSITIONING THE HEATER
The heater should only be operated at the minimum
distances noted in Figure 2 on page 5.
TO OPERATE
1. Plug into 240V AC power point.
2. To turn on - Switch on at the power point.
3. To tun off - Switch off at the power point. Unplug lead
from power point when not in use.
IMPORTANT: Turn off the heater. Switch off the power
switch and disconnect the heater from the power socket.
Always ensure that the heater has been left for one (1)
hour to cool before cleaning.
• Turn off and disconnect from mains power, allow the
cool.
• Wipe unit over with a damp, clean, soft lint-free cloth.
• For stubborn marks you can use a mild dish washing
solution on a damp, clean, soft lint-free cloth.
NEVER use solvents, e.g. Petrol, Toluene, Methylated
Spirits etc to clean the heater, as these will damage the
surface finish and may cause a fire when unit is next
used.
• DO NOT spray with liquids or submerge in liquids or
water.
• DO NOT allow water or mild dish washing solution to
enter or drip onto the heater.
• DO NOT attempt to clean the interior of the heater.
• DO NOT attempt to open the heater casing at any
time.
CLEANING AND CARE OPERATING INSTRUCTIONS