Gasboy SERIES 1000, Руководство по эксплуатации

Страница: 80 / 241

GASBOY Series 1000
9-2 05/29/03
TRANSACTION HEADINGS
No matter what type of transaction printing you choose, you always get the same fields. The only
difference is with the PT, ST, and SS commands, you get a formatted report and with the PC and
PH commands, you get a string of unformatted data. Additionally, the PC and PH formats include
a 3-digit checksum at the end or each transaction.
All formatted transaction printouts contain abbreviated headings. Some headings apply only if you
have a specific option. The headings and their related fields are:
SITE
- site number
TRAN - transaction number
CARD - card number
ID field 1** - usually employee number (EMP)
*
ID field 2** - usually vehicle number (VEH)
*
"A" Systems may have up to 4 ID fields.
man. entry** - manual entry field, Manual Keypad Entry option
*
"A" Systems may have
mandatory manual entry.
DATE - Gregorian date
TIME - 24-hour (military) time
P# - pump number
PR - product type
QUANTITY - quantity of product dispensed
PRICE - unit price of product (depends on Price Data Format setting)
$TOTAL - total calculated transaction price (depends on Price Data Format setting)
ODOM/C HOURS - odometer mileage entry or current hours entry. "A" Systems may not have
odometer.
KLMS/TIME E - kilometers travelled, hours elapsed, L/100KM or LPH option only
L/100 or LPH - liters per 100 kilometers or liters-per-hour calculation, L/100KM or LPH
option only
ERROR - transaction message
*
You designate the names for ID field 1 and 2 (EMP and VEH) and (if you have the option)
the manual entry field (DEPT) at the time of order. Your field names may vary from the
ones shown.
**
Series 1000 systems matching "A" System optical cards will have the transaction headings
as specified on the existing cards.
Price Data Format Effect on Headings
When you set your system configuration parameters, the choice you make for Price Data Format
affects which headings are displayed on transaction printouts. You may get unit price (PRICE)
and total transaction price ($TOTAL) headings and data.
If you choose regular (PT) or sorted (ST or SS) transaction printing and your setting is 0, you get
no headings for unit and total price and no pricing data. If you have a penny pulsing pump and
your setting is 1, you get the unit price (PRICE) heading and the unit price. For quantity pulsing
pumps, only the unit price heading is shown. If your setting is 2, you get unit price (PRICE) and
total price ($TOTAL) headings and price data for all transactions regardless of pulse rate.
If you choose compacted format (PC or PH), unit price and total price are always shown.