Gasboy SERIES 1000, Руководство по эксплуатации

Страница: 19 / 241

05/29/03 2-1
Section 2
FUELING WITH THE SERIES 1000
The GASBOY Series 1000 System is designed to guide even untrained users effortlessly through
the operation of the system. A series of prompts, which appear on the Liquid Crystal Display
(LCD), guides the user through the fueling transaction. For additional reference, operating
instructions are printed on the cabinet face.
A typical fueling using a Series 1000 (magnetic or optical card) is accomplished as follows:
1. Position your vehicle adjacent to the fuel dispensing equipment. Be sure to note the
odometer reading (if your system uses this feature).
In its idle state, the Series 1000 LCD display alternates between an ENTER CARD message
and a personalized system message.
2.
If you are using a two-card optical system, place the two optical cards on top of each other
(order does not matter) with the cut corner to the left and towards the reader and insert them
into the reader as one card. Skip to Step 6.
If you are using magnetic cards, insert your card fully into the card reader with the magnetic
stripe facing down and to the left. The LCD displays: REMOVE CARD
3.
Remove the card. If you leave a card in the reader for more than five seconds, an alarm
sounds to remind you to remove it. If you are using a one-card system, skip to Step 7.
4.
If you are using a two-card system, the LCD displays: ENTER SECOND CARD.
5.
Insert the second card fully into the card reader with the magnetic stripe facing down and to
the left. The LCD displays: REMOVE CARD.
6.
Remove the card(s) from the reader.
7.
If your system uses the receipt printer option, go to Step 8.
If your system uses PINs, go to Step 9.
If your system uses odometer readings only, go to Step 10.
If your system uses none of these, go to Step 11.
8. If you have the receipt printer option and a prior transaction (with quantity) receipt is
available, the LCD displays: RECEIPT? 1=YES 0=NO.
To print a transaction receipt, press 1 and ENTER. The LCD displays: RECEIPT IS
PRINTING. If you have requested multiple receipts, they print out one after the other. The
system goes to idle and you must reinsert your card(s) to begin a fueling transaction.
If you do not want a receipt, press 0 and ENTER. Skip to Step 9. For more on receipt
printing, see Section 23.