GAS GAS Enduro 2T 200CC, Руководство по ремонту

Страница: 47 / 72

Workshop manual
-47-
SeRVICING aND RePaIRING THe eNGINe’S COmPONeNTS
- Check the thickness of the iron clutch disc.
Clutch disc thickness STD: 1.45 to 1.55 mm.
Limit: 1.40 mm.
Clutch rod
- Check the clutch rod for deformation.
Maximum clutch rod deformation 0.05 mm.
Clutch hub
- Check that the clutch disc housings (arrow) are not misaligned due to excessive
wear.
- Check condition and clutch disc contact surface -1- for scratches and excessive
wear.
- Check that oil circulation holes -2- are free of dirt and metal particles.
Clutch basket sprocket
- Check the contact surface of bearing -1- for jamming marks, grooves and gaps.
- Check on both sides that lubrication grooves -2- are free of dirt and metal
particles.
- Check that there is no gap between basket -3- and sprocket -4-.
- Check that the clutch disc housings (arrow) are not misaligned due to excessive
wear.
Clutch basket bearings
- Check the clutch basket bearing and selector shaft
- Check that the selector shaft shows no signs of excessive wear or contact
marks.
2
1
1
2
3
4