GAS GAS Enduro 2T 200CC, Руководство по ремонту

Страница: 13 / 72

Workshop manual
-13-
RemOVING THe eNGINe fROm THe fRame
- Completely remove the clutch rod (arrow).
Note:
Oil should never be poured down the drain or discharged into the
environment.
- Detach the retaining ring (1) from the output sprocket using retaining ring
pliers.
- Remove the output sprocket (2) from the secondary shaft.
- Detach the gear lever (3).
- Release the wiring of the magnetic flywheel from its attachments to the frame
and uncouple the connector on the control unit (CDI) and the other wiring
connectors.
- Remove the carburettor (4)
- Extract the screws (arrows) that secure the engine to the frame.
- Loosen the 3 screws (arrows) that secure the cylinder head bracket to the
frame.
1
2
3
4