30
MAINTENANCE INSTRUCTIONS
- Loosen the bolts
D
on both sides then remove the upper suspension
plate
E
.
- Rotate the steering adjustment nut using the special spanner in
order to obtain the appropriate adjustment.
- Fit the upper suspension plate
E
.
- Fit the washers, tighten the steering shaft bolt
C
, the steering shaft
nut
B
and the bolts
D
to the correct torques below:
Steering nut: 44 Nm (4.5 Kgm)
Suspension plate bolts: 22 Nm (2.25 Kgm)
- Check the steering once more and adjust again if necessary.
- Refit all removed parts.
ENGINE OIL
The oil must comply with the SAE 10W-50 standard, classification
API SF or SG.
Note
If you are using the motorcycle in climates with extreme
temperatures then choose the most suitable engine oil using
the attached table as a guide.
Oil level
Note
-
To keep your engine in perfect working order, regularly check
the oil level and change the oil.
-
The engine oil increases in volume when it is hot. Check and
adjust the level when the oil is cold.
-
Initially replace the oil after 5 hours of operation and then
every 60 hours. See the maintenance table.
Changing the oil
DANGER
-
The engine oil and the exhaust manifold can be very hot and
cause burns. Wait until the oil and the exhaust manifold are cool.
- Exhaust fumes are highly toxic and may result in loss of
consciousness or even death. When the engine is running, ensure
that there is always adequate ventilation.
ENGINE OIL
20W-50
15W-40 15W-50
10W-40 10W-50
10W-30
TEMP.
ºC
-30 -20 -10 0 10 20 30
ºF
-22 -4 -14 32 50 68 86
D
E
