27
MAINTENANCE INSTRUCTIONS
DANGER
Never reduce the play of the rear brake pedal to less than 10
mm. If the play is reduced then the brake cylinder acts on the
rear brake pads, which then remain in permanent contact with
the brake disc; this could result in brake failure due to
overheating.
If the rear brake has a spongy feeling then it is possible that
there is air in the hydraulic circuit. We recommend that you visit
a GAS GAS workshop immediately.
BRAKE FLUID
- Check the condition of the brake fluid using the level inspection
windows on both the front brake tank
A
and rear brake tank
B
. If the
brake fluid is dark or appears dirty then go immediately to an approved
GAS GAS workshop to replace the fluid.
WARNING
Brake fluid absorbs ambient humidity and degrades with time.
So that the brake fluid retains its specifications, use only fluid
from sealed containers and respect the replacement periods as
shown in the MAINTENANCE CHART.
Brake fluid is corrosive to paintwork. Avoid contact between
the fluid and paintwork.
- Only use fluid in accordance with DOT 3 or DOT 4.
A
B
