42
MAINTENANCE INSTRUCTIONS
REAR SUSPENSION
Checking
The rear suspension is fitted with a hydraulic telescopic shock
absorber fitted to the chassis and to the swinging arm by ball joints.
Maintenance of this system consists only of inspecting the ball joints
and the swinging arm joint on the chassis.
LUBRICATION
Note
-
Before lubricating each part, clean off any rusty spots with
rust remover and wipe off any grease, oil, dirt, or grime.
-
Lubricate the points shown here, with either motor oil or regular
grease, periodically or whenever the vehicle is wet, and
especially after using a high-pressure spray washer
.
General lubrication
Lubricate the points indicated with an arrow
- Clutch lever
.
- Front brake lever
.
- Rear brake pedal.
Note
In order to lubricate the control cables (for example the throttle
control) several lubricants in aerosols are available on the market.
Ask for information from your approved GAS GAS workshop.