Garrett PD 6500i, Руководство пользователя

Страница: 11 / 44

11
©2003 GARRETT METAL DETECTORS PN 1532010 REV A
GARRETT PD 6500
i
USER MANUAL
1.3.2 DESCRIPTION OF AUDIO RESPONSES
1.3.2.1 TARGET ALARMS
The steady single pitch audio alarm indicates that a target has been identified
according to the program and sensitivity settings.
1.3.2.2 WARBLE ALARM
A quickly alternating two-tone alarm occurs when a large metal object, such
as a wheelchair, piece of furniture, or metal container, moves through or near
the PD 6500
i and overloads the detector’s circuits. The warble sound prompts
the operator to correct the situation before allowing anyone to pass through
the metal detector.
1.3.2.3 TAMPER ALARM
When the ACCESS touchpad is pressed, the detector beeps for about ten
seconds until a valid user is selected and a numeric access code is entered.
If a person or object passes through the archway during this time, a loud
low-toned alarm will activate. If an invalid code is entered, the message:
ACCESS DENIED appears on the LCD, and the same audible
tamper alarm sounds and normal operation resumes. The tamper alarm may
be set to block access after three unsuccessful attempts have been made for
a user. The entry of an access code for next level of security is required in
order for operation to resume.
Each access attempt is indicated by an increase in the sequence code as
reported on the LCD. Any unauthorized access attempt that activates the
tamper alarm is indicated by an asterisk (*) which remains until the system is
successfully accessed.
2. INSTALLATION
2.1 SITE SELECTION & REQUIREMENTS
Before choosing a site for the PD 6500 i Walk-Through Metal Detector, it is
important to consider the volume and throughput requirements of patron
traffic, space availability and overall environmental conditions. In all cases, the
PD 6500
i must be installed on a level, stable floor. The following site require-
ments are provided as guidelines to a successful installation.
Garrett Metal Detectors (Garrett) has years of experience designing, installing
and operating security screening checkpoints. Garrett's experience ranges
from very small, one and two detector checkpoints, to very large, 900 detector
Olympic operations. Garrett always prefers to work closely with its clients
when designing checkpoints. Every client has a unique situation and needs a
somewhat customized solution. Garrett is happy to assist in designing and
implementing these solutions. This section is intended to provide general
information for designing security screening checkpoints.