Garrett PD 6500i, Руководство пользователя

Страница: 9 / 44

9
©2003 GARRETT METAL DETECTORS PN 1532010 REV A
GARRETT PD 6500
i
USER MANUAL
all self-prompting regulation and control functions as well as traffic
count information.
1.3.1.4 ALARM LIGHT
The red ALARM light is a visual indication of an alarm when the unit detects a
targeted amount of metal within the walk-through according to the program
and base sensitivity settings. When a target is detected the alarm light
appears even if the audio volume is off.
1.3.1.5 TOUCHPAD KEY LOCK
Disables touchpad to prevent tampering.
1.3.1.6 TOUCHPADS
Use to access setup and in programming. Function of touchpad depends upon
key lock and user access setting. (See section 3.1)
FIGURE 1-2
1.3.1.6.1 OPERATE (ON / SELF-TEST)
The OPERATE touchpad is used to turn the PD 6500
i
on. The unit will be
ready to operate within ten seconds. Activate the manual self-test at any time
by pressing OPERATE.
1.3.1.6.2 OFF
The OFF touchpad is used to turn the PD 6500
i
off, ensuring that all of the
information and settings are stored in memory until the detector is ready to
resume full operation.
1.3.1.6.3 COUNTER
The COUNTER touchpad is used to obtain an automatic update on the traffic
count that appears on the LCD. The counter also reports alarm statistics such
as alarm count and alarm count %.
If operator access is enabled, the counter may be reset by pressing the
COUNTER touchpad for approximately ten seconds.
1.3.1.6.4 VOLUME
The VOLUME touchpad is used to access the volume control of the audio
alarm.