SAVE THIS MANUAL
To ensure proper and safe operation, please read
these user instructions carefully and keep them for future
reference.
This manual contains important instructions for the DC
quick charger that shall be followed during installation,
operation and maintenance of the unit.
This equipment shall be installed, adjusted, and serviced
by qualified electrical personnel familiar with the
construction and operation of this type of equipment and
associated hazards.
The locking key, supplied with unit, should be kept in a
secure and known location by an individual that has read
and understands the content of this manual.
Do not open the front cover at any time while input power
is present.
Notes
Cautions
Do not operate the unit while the cabinet door is opened
or unlocked.
Failure to follow these instructions may result in death,
serious injury or equipment damage.
Warnings
RISK OF ELECTRIC SHOCK, INJURY, AND/OR
BURNING
Only qualified, trained and authorized people will
repair, replace or adjust this equipment.
Make sure the AC input breaker is OFF and measures
0V before the breaker.
Do not use this product if the cables (input or output)
are frayed, have damaged insulation
or any other signs of damage.
Do not use this product if the enclosure or the EV
connectors are broken, cracked, opened or show any
other indication of damage.
This equipment employs parts, such as switches
and relays, that tend to produce arcs or sparks and
therefore, when used in a garage, locate in a room
or enclosure provided for the purpose or not less than
500 mm (18 inches) above the floor.
Failure to follow these instructions can result in death or
serious injury
SAFETY NOTES
Read these instructions carefully, and look at the equipment
to become familiar with the device before trying to install,
operate, or maintain it. The following special messages may
appear throughout this documentation or on the equipment to
warn of potential hazards or to call attention to information that
clarifies or simplifies a procedure.
RISK OF DAMAGE TO THE TERMINAL
Do not use this product if the cables (input or output) are
frayed, have damaged insulation or any other signs of
damage.
Do not use this product if the enclosure or the Electrical
Vehicle Supply Equipment (EVSE) connectors are broken,
cracked, opened or shows any other indication of
damage.
Do not use a cord extension set or second cable assembly
in addition to the cable assembly for the connection of the
EV to the EVSE.
This equipment is not intended for use in residential
environments and may not provide adequate protection to
radio reception in such environments.
Failure to follow these instructions may result in serious
injury or equipment damage.
3
EN
