HD-3WXL Operation and Installation Manual
8
The
HD-3WXL
operation is automatically completed in one cycle or when the media has been
released down the exit chute.
Note:
As a safeguard, the media will stay in the degaussing
chamber until a successful erase sequence has been completed.
OPERATION
CONTROLS AND INDICATORS
POWER Button
The POWER button is a toggle switch that will change states from on to off when pressed.
When the POWER button is depressed, the power is on.
LCD Display
The LCD display gives status, automatic count, total count, software version, field strength, user
instructions and fault messages.
DEGAUSSING INSTRUCTIONS
The HD-3WXL media degausser operates automatically when media is inserted into the media
door.
Automatic Degaussing
Sensors built into the Media Entrance Door sense that a hard drive has been inserted. The act
of depositing media through the Media Entrance Door automatically initiates the degaussing
process.
Powering Up
Press the POWER button ON. The HD-3WXL will go in to its power up sequence. The LCD
display will show start up messages including firmware version and total count ending with
“INSERT MEDIA SESSION = 0”. Automatic Degaussing has now started.
