Garmin Connect Settings
You can change your device settings from your Garmin Connect account, using either the Garmin Connect app
or the Garmin Connect website. Some settings are available only using your Garmin Connect account and
cannot be changed on your device.
• From the Garmin Connect app, select
or
, select Garmin Devices, and select your device.
• From the devices widget in the Garmin Connect application, select your device.
After customizing settings, sync your data to apply the changes to your device (
,
Using Garmin Connect on Your Computer, page 38
).
Wireless Sensors
Your device can be used with wireless ANT+ sensors. Your device with music features can also be used with
Bluetooth sensors. For more information about compatibility and purchasing optional sensors, go to
.
Pairing Your Wireless Sensors
The first time you connect a wireless ANT+ or Bluetooth sensor to your Garmin device, you must pair the device
and sensor. After they are paired, the device connects to the sensor automatically when you start an activity
and the sensor is active and within range.
TIP: Some ANT+ sensors pair with your device automatically when you start an activity with the sensor turned
on and near the device.
1 Move at least 10 m (33 ft.) away from other wireless sensors.
2 If you are pairing a heart rate monitor, put on the heart rate monitor.
The heart rate monitor does not send or receive data until you put it on.
3 Hold .
4 Select > Sensors > Add New.
5 Bring the device within 3 m (10 ft.) of the sensor, and wait while the device pairs with the sensor.
After the device connects to the sensor, an icon appears at the top of the screen.
Foot Pod
Your device is compatible with the foot pod. You can use the foot pod to record pace and distance instead of
using GPS when you are training indoors or when your GPS signal is weak. The foot pod is on standby and
ready to send data (like the heart rate monitor).
After 30 minutes of inactivity, the foot pod powers off to conserve the battery. When the battery is low, a
message appears on your device. Approximately five hours of battery life remain.
Calibrating Your Foot Pod
Before you can calibrate your foot pod, you must pair your device with the foot pod (
).
Manual calibration is recommended if you know your calibration factor. If you have calibrated a foot pod with
another Garmin product, you may know your calibration factor.
1 Hold .
2 Select > Sensors > Foot Pod > Cal. Factor.
3 Adjust the calibration factor:
• Increase the calibration factor if your distance is too low.
• Decrease the calibration factor if your distance is too high.
46
Wireless Sensors
Содержание Venu 2S Series
Страница 6: ......
Страница 68: ...support garmin com GUID D93137A9 B374 4A24 8A4D A66C9AC91265 v1 April 2021...
