Garmin StreetPilot GPS, Руководство пользователя и справочное руководство, Страница: 58 / 90

F Fiinnddiinngg aann A Addddrreessss
Otherwise, highlight Change City , press E ,
and use a similar procedure that you used to
find the Street to find the correct City (see top
left picture).
12. Press the
V
area of the K keypad to highlight
the Zip and if necessary, press E to edit it. If a Zip Code was filled in, the StreetPilot gives
you the choice to enter a new Zip Code, or to leave it blank. If you would like it to search all Zip
Codes, highlight
Leave it Blank and press E . Otherwise, select Change Zip Code , press
E , and use a similar procedure that you used to find the Street to find the correct Zip Code.
13. Press the
V
area of the K keypad to highlight Search and press E to begin the search.
If more than one matching Address is found, the results of the search are shown with the best
matches at the top of the list (see bottom left picture).
14. Use the K keypad to select the desired Address and press E to display the Address infor-
mation page (see bottom right picture), which typically
shows the Number, Street, City, State, and Zip, along
with a map window.
Note:
Steps 11 and 12 are optional. They may
be useful in reducing the number
of
addresses found by the search.
Highlighting a City
Best Search Matches Displayed
The Address Information Page
Note:
The location shown on the map for an address
may differ from the actual location, particularly
in areas where spacing of streets is irregular.
Ù
48
reference