Garmin StreetPilot GPS, Руководство пользователя и справочное руководство, Страница: 57 / 90

5. Press E once the desired Number is shown.
6. Press the
V
area of the K keypad to highlight the Street and
if necessary, press E to edit it. The screen changes to dis-
play the ‘Select Street Name’ page.
7. Use
^
and
V
areas of the K keypad to select the first letter
or number of the desired Street (see top right picture).
8. Press the > area of the K keypad to move to the next digit of
the Street, and repeat step 7 as necessary.
9. Once you see the Street you are looking for on
the screen, or can see that you are getting close
to it (see middle right picture), press
E to
move down to the alphabetical list.
10. Use the K keypad to select the desired Street (see bottom right picture) and press E . If
you decide the Street you are looking for is in another area of the alphabetical list, press O ,
select ‘Start New Search’, press E and go back to step 7.
11. Press the
V
area of the K keypad to highlight the City and if necessary, press E to edit it.
If a City name was filled in, the StreetPilot gives you the choice to enter a new City, or to leave it
blank. If you would like it to search all Cities, highlight
Leave it Blank and press E .
Entering the Street Name
Selecting the Desired Street
Identifying the Street
reference
F Fiinnddiinngg aann A Addddrreessss
Ù
47
Note:
Streets are searched
according to their
“base names”. For example,
‘Hwy 10’, ‘I-10’, ‘SW 10th St’,
and ‘Co Rd 10’ would all be
found by entering
10 .