Garmin StreetPilot GPS, Руководство пользователя и справочное руководство, Страница: 11 / 90

Battery/MetroGuide Cartridge Installation
The StreetPilot operates on six (6) AA batteries which
are installed from the left end of the unit, when viewed
from the front. Alkaline, rechargeable NiCad, or lithium
batteries may be used. For extended operation, use the ciga-
rette lighter adapter to conserve batteries.
ii
To install batteries and a MetroGuide cartridge:
1. Flip up the metal ring at the left end of the unit, and turn the ring ¼ turn counterclockwise.
2. Install the batteries (see picture at right). When replacing the StreetPilot batteries, observe the
polarity markings molded in the rubber base of the unit and in the plastic inside the battery com-
partment door.
3. If you are using an optional MetroGuide cartridge with regional Street, Address, and Point of
Interest data, plug the cartridge into the slot next to the battery compartment, with the label fac-
ing toward the front of the StreetPilot unit (see picture at right).
4. Close the battery compartment door.
5. Lock the door in the closed position by rotating the metal ring ¼ turn clockwise, and return the
metal ring to its original position flush with the end of the unit.
Battery life varies due to a variety of factors, including temperature and backlighting
usage. You may find that lithium batteries provide longer life in colder conditions. An internal
10-year lithium battery will retain your data while you’re changing AA batteries.
Caution
Make sure the connec-
tor end of the MetroGuide is
inserted into the cartridge slot,
NOT the extractor handle end.
Improper installation can result
in internal damage to your
StreetPilot unit.
Note:
The on-screen battery
level indicator may be calibrat-
ed for alkaline or NiCad batter-
ies, but will not be accurate
when using lithium batteries.
quick-start
B Baatttteerryy//C Caarrttrriiddggee IInnssttaallllaattiioonn
Ù
1