Garmin SOCATA TBM850, Руководство пилота

Страница: 68 / 684

Garmin G1000 Pilot’s Guide for the Socata TBM 850
190-00709-04 Rev. A 54
FLIGHT INSTRUMENTS
2.1 FLIGHT INSTRUMENTS
AIRSPEED INDICATOR
NOTE:
Refer to the Pilot’s Operating Handbook (POH) for airspeed criteria and Vspeed values.
The Airspeed Indicator displays airspeed on a moving tape rolling number gauge. The true airspeed is
displayed in knots below the Airspeed Indicator. The numeric labels and major tick marks on the moving
tape are shown at intervals of 10 knots. The minor tick marks on the moving tape are marked at intervals of
five knots. Speed indication starts at 20 knots, with 60 knots of airspeed viewable at any time. The
indicated
airspeed is displayed inside the black pointer. The pointer remains black until reaching maximum operating
speed (V
MO
), at which point it turns red.
Figure 2-4 Red Pointer
Showing Overspeed
Indicated
Airspeed
True
Airspeed
Speed
Ranges
Airspeed
Trend
Vector
Vspeed
References
Figure 2-3 Airspeed Indicator
A color-coded (white, green, and red/white barber pole) speed range strip is located on the moving tape.
The colors denote flaps operating range, normal operating range, and maximum operating speed (V
MO
). A
red range is also present for low speed awareness.
The Airspeed Trend Vector is a vertical magenta line that appears to the right of the color-coded speed
range strip when airspeed is either accelerating or decelerating. One end of the magenta line is anchored
to the tip of the airspeed pointer while the other end moves continuously up or down corresponding to the
rate of acceleration or deceleration. For any constant rate of acceleration or deceleration, the moving end
of the line shows approximately what the indicated airspeed value will be in six seconds. The trend vector
is absent if the speed remains constant or if any data needed to calculate airspeed is not available due to a
system failure.