Garmin nuviCam, Быстрое руководство по установке

Страница: 54 / 58

54 nüviCam
• Connect the device to the vehicle power cable.
• Connect the device to a computer using a USB cable.
The device may charge slowly when connected to a
computer. Some portable computers may not charge
the device.
• Connect the device to an optional power adapter
accessory, such as a wall power adapter.
You can purchase an approved Garmin AC-DC
adapter suitable for home or office use from a Garmin
dealer or Garmin.com.sg
Changing the Fuse in the Vehicle Power Cable
NOTICE
When replacing the fuse, do not lose any of the small
pieces and make sure they are put back in the proper
position. The vehicle power cable does not work unless it
is assembled correctly.
If your device does not charge in your vehicle, you may
need to replace the fuse located at the tip of the vehicle
adapter.
1 Rotate the end piece
1
90 degrees counter clock-
wise to unlock it.
TIP: You may need to use a coin to remove the end
piece.
2 Remove the end piece, the silver tip
2
, and the fuse
3
.
3 Insert a new fast-blow fuse that has the same current,
such as 1 A or 2 A.
4 Place the silver tip in the end piece.
5 Push in the end piece and rotate it 90 degrees clock-
wise to lock it back into the vehicle power cable
4
.
Removing the Device, Mount, and
Suction Cup
Removing the Device from the Mount
1 Grip the device by the top and bottom.
2 Pull the bottom edge of the device toward you until it
releases from the magnet.
Pulling the device straight toward you may cause the
mount to release from the suction cup.