Garmin nuviCam, Быстрое руководство по установке

Страница: 35 / 58

34 nüviCam nüviCam 35
NOTE: Categories appear in the saved locations menu
after you have saved at least 12 locations.
1 Select Where To? > Saved .
2 Select a location.
3 Select .
4 Select > Edit > Categories .
5 Enter one or more category names, separated by
commas.
6 If necessary, select a suggested category.
7 Select Done .
Deleting a Saved Location
NOTE: Deleted locations cannot be recovered.
1 Select Where To? > Saved .
2 Select > Delete Saved Places .
3 Select the box next to the saved locations to delete,
and select Delete .
Using the Map
You can use the map to navigate a route ( Your Route on
the Map ) or to view a map of your surroundings when no
route is active.
1 Select View Map .
2 Touch anywhere on the map.
3 Select an option:
• Drag the map to pan left, right, up, or down.
• To zoom in or out, select or .
• To switch between North Up and 3-D views, select
.
• To filter the displayed points of interest by category,
select .
• To start a route, select a location on the map, and
select Go! ( Starting a Route by Using the Map ).
Map Tools
Map tools provide quick access to information and device
functions while you are viewing the map. For example,
you can view traffic information, take a detour, or adjust
the screen brightness without leaving the map. When you
activate a map tool, it appears in a panel at the edge of
the map.
Viewing a Map Tool
1 From the map, select .
2 Select a map tool.
The map tool appears in a panel at the edge of the
map.
3 When you are done using the map tool, select .
Enabling Map Tools
By default, only the most commonly used map tools
are enabled in the map tools menu. You can enable
additional tools.
1 From the map, select > .
2 Select the check box next to each tool to add.
3 Select Save .
Up Ahead
You can view upcoming businesses and services along
your route or the road on which you are traveling. Ser-
vices are filtered by category.