![Garmin GTN 625 Скачать руководство пользователя страница 171](http://html.mh-extra.com/html/garmin/gtn-625/gtn-625_installation-manual_565346171.webp)
190-01004-02
GTN 625/635/650 TSO Installation Manual
Rev. F
Page 6-61
6.12 Interface Checkout
This section describes the checks that must be carried out to verify that systems interfacing to the GTN are
communicating properly. Only those interfaces that are connected to the GTN must be verified.
6.12.1
Honeywell (Bendix/King) EFS40/50 Interface Check
If a Honeywell EFS40/50 has been connected to the GTN, the interface should be verified as described in
this section.
1. Cycle power to the GTN #1 and acknowledge the prompts until it gets to the Instrument Panel
Self-Test page (see Section 6.11.1).
2. Ensure that GPS1 data is displayed by pressing the “1-2” key on the EFS40/50 control panel.
3. While the GTN is displaying the self test page, verify that the EFS40/50 is displaying data from
the GPS source. Note that vertical deviation will not be displayed.
Course Deviation: Half-scale left deviation, TO indication, flag pulled
Active Waypoint:GARMN
Vertical Deviation:Half-scale up deviation (only if installation is setup to display GPS vertical
deviation)
4. On the GTN verify that an OBS value is displayed (and not dashed out).
5. Using a VOR test set verify that the CDI deviation on the EFS40/50 is displayed correctly.
6. Cycle power to the second GTN and acknowledge the prompts until it gets to the self test page.
7. Switch to GPS2 data by pressing the “1-2” key on the EFS40/50 control panel and repeat steps 3
through 5 with the second GTN.
6.12.2
Sandel SN 3308 Interface Check
If a Sandel EHSI has been connected to the GTN, the interface should be verified as described in one of the
following sections, as appropriate for the installation.
6.12.2.1 One GTN/One SN 3308
1. Cycle power to the GTN and acknowledge the prompts until it gets to the Instrument Panel Self-
Test page (see Section 6.11.1).
2. Ensure that the SN3308 is receiving valid heading.
NOTE
The Vertical Deviation Indication will not be displayed unless the SN3308 is receiving
valid heading.
3. While the GTN is displaying the self test page, verify that the SN3308 is displaying the following
data from the GPS source.
Course Deviation: Half-scale left deviation, TO indication, flag pulled
Vertical Deviation: Half-scale up deviation, flag pulled
Active Waypoint:GARMN
4. On the GTN verify that an OBS value is displayed (and not dashed out).
5. Acknowledge the self test on the GTN by touching the ‘Continue’ key.
6. Select VLOC on the GTN and verify that the SN3308 displays NAV 1 or NAV 2 (depending on
what navigation source the GTN is).
7. Using a VOR test set verify that the CDI deviation on the SN3308 is displayed correctly.
Содержание GTN 625
