Garmin GPS III Plus Скачать руководство пользователя | Manualshive

Страница: 99 / 114

background image

The GPS III+’s antenna may be removed to allow attachment of an optional

remote-mounted  antenna.  In  some  applications,  using  a  remote-mounted  antenna
will dramatically increase the number of satellites received. The GPS antenna should
be  mounted  in  a  location  which  provides  an  unobstructed  view  of  much  of  the
sky.  A  minimum  of  four  satellites  are  needed  to  determine  a  three  dimensional  position.  Satellite  coverage  will  vary
throughout the day, but may be checked at any time using the Satellite Status Page (see page 25). If satellite reception is
limited in your particular installation, you may want to consider one of the following options:

Remote Suction Cup Mount

– allows you to mount the standard detachable antenna up to 6 feet away from the

GPS III+ unit, using a suction cup mount. This mount should only be used inside a vehicle.

GA 26C Remote Antenna

– allows you to mount an amplified antenna outside the vehicle, up to 8 feet away, using

supplied magnetic or suction cup mounts. An optional extension cable allows you to mount the antenna up to 16
feet away. Trunk lip and permanent flange mounts are also available.

GA 29 Remote Marine Antenna

- allows you to mount an amplified antenna outside the vehicle, up to 30 feet

away, using a standard 1-inch marine antenna mount (not supplied). An optional extension cable allows you to
mount the antenna up to 60 feet away.

To remove the attached antenna:

1. Rotate the antenna toward the rear of the unit as shown. Note: The

antenna can only be removed or installed in this position.

2. Pull the antenna gently away from the unit.

3. To install an optional external antenna, mate the BNC connector

notches with the mounting posts and turn the knurled knob one-
quarter turn clockwise.

89

APPENDIX D

Antenna / Remote Mounting

«
...
97
98
99
100
101
...
»

Содержание GPS III Plus



















































































































Отзывы:

Нет отзывов

Похожие инструкции для GPS III Plus

Бренд: Hama Страницы: 12

Бренд: Harman Kardon Страницы: 12

Бренд: Nextar Страницы: 41

DRIVE NAVIO 2 740

Бренд: Goclever Страницы: 54

Бренд: naviflash Страницы: 2

Бренд: Fastrax Страницы: 20

Бренд: WhereSafe Страницы: 3

Бренд: Kestrel Страницы: 2

Бренд: Kestrel Страницы: 32

Mapping GPS & MP3 Player

Бренд: Lowrance Страницы: 60

Бренд: Lowrance Страницы: 28

Бренд: Lowrance Страницы: 128

Бренд: innoXplore Страницы: 20

Бренд: MyFlyDream Страницы: 32

Бренд: Dagama Страницы: 21

LMU 2500 Series

Бренд: CalAmp Страницы: 14

Бренд: Maestro Страницы: 17

Mitu DPSDWQ01LQ

Бренд: Mi Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды