Garmin GPS 400, Руководство и справочник пилота

Страница: 52 / 238

GPS 400 Pilot’s Guide and Reference
190-00140-60 Rev. E
SECTION 2
NAV PAGES
2-26
4) Turn the small right knob to select ‘Above
Wpt’ (AGL) or ‘MSL’, (Figure 2-52) and press
the
ENT
Key. ‘Above Wpt’ uses the altitude
of a destination airport as stored in the
Jeppesen NavData Card. ‘MSL’ lets the pilot
set a specific target altitude for any waypoint
category: airport, VOR, NDB, intersection, or
user waypoint.
Figure 2-52 Reference Window
5) Turn the small and large
right
knobs to select
a distance from the target reference waypoint
(Figure 2-53) and press the
ENT Key. If the
target altitude should occur at the target
reference waypoint, enter a distance of zero.
Figure 2-53 Reference Distance Selected
6) Turn the small right knob to select ‘Before’
or ‘After’, and press the
ENT
Key. This setting
designates whether the offset distance defines
a point before the aircraft reaches the target
reference waypoint or after the aircraft reaches
the waypoint.
7) When using a flight plan, the target refer-
ence waypoint itself can be specified from the
waypoints contained in the flight plan. By
default, the last waypoint in the flight plan is
selected. To select a different waypoint, turn
the small
right knob to select the desired
waypoint and press the ENT Key.
8) The default profile utilizes a 400 fpm descent
rate. To change the rate, turn the large
right
knob to highlight the ‘VS Profile’ field (Figure
2-54) and use the small and large
right knobs
to enter a new rate. Press the
ENT
Key when
finished.
Figure 2-54 VS Profile Field Selected