Garmin GPS 400, Руководство и справочник пилота

Страница: 111 / 238

GPS 400 Pilot’s Guide and Reference
190-00140-60 Rev. E
6-9
SECTION 6
WPT PAGES
NOTE: Not all approaches in the database
are approved for GPS use. When selecting an
approach, a ‘GPS’ designation to the right of the
procedure name indicates the procedure can be
flown using the GPS receiver. Some procedures
do not have this designation, meaning the
GPS receiver may be used for supplemental
navigation guidance only. ILS approaches, for
example, must be flown by tuning the external
VLOC receiver to the proper frequency and
following the CDI or HSI.
Airport Approach Page Options
The available options for the Airport Approach Page
can be displayed by pressing the MENU Key (Figure
6-20):
Option Description
Load into Active FPL? Allows the pilot to load the
selected approach into the active
flight plan without activating
it. This performs the same
operation as selecting ‘Load?’
from the Procedures Page ‘Select
Approach?’ option. See Section
5.1.
Load and Activate? Allows the pilot to load the
selected approach into the
active flight plan and activate
navigation guidance to the
approach transition (Section 5.1).
Table 6-2
Loading an approach from the Airport
Approach Page:
1) Select the desired approach and transition
using the steps outlined in Section 5.1 (Figure
6-19).
Figure 6-19 Airport Approach Page
2) Press the
MENU
Key to display the Airport
Approach Page Menu.
3) Turn the large right knob to highlight ‘Load
into Active FPL?’ and press the ENT Key (Figure
6-20).
Figure 6-20 Airport Approach Page Menu
4) The Active Flight Plan Page appears. Press the
FPL
Key to return to the Airport Procedures
Page.
To load and activate an approach from the Airport
Approach Page, follow the steps above, but select ‘Load
and Activate?’ in step 3.