manualshive.com logo in svg

Garmin GPS 400, Руководство и справочник пилота

Garmin GPS 400 - навигационное устройство, предназначенное для авиации. Поставляется с Pilot's Manual and Reference для полноценного использования. Можете бесплатно скачать руководство на русском языке на manualshive.com. Надежное и удобное устройство для пилотов.

Поделиться
Скачать
background image

GPS 400 Pilot’s Guide and Reference

190-00140-60  Rev. E

SECTION 12 – MESSAGES, 

ABBREVIATIONS, & NAV TERMS

12-5

Message

Description

No basemap data 
available

The GPS 400 has detected a failure in the built-in basemap (land data) memory.  Land data 
does not appear on the Map Page.  Other unit functions continue to work normally; however, 
the GPS 400 should be taken to a Garmin dealer for service at the earliest convenience.

Not receiving input 
data on 429 Channel 1

No data has been received on the ARINC 429 channel 1 connection for a period exceeding 
five seconds.  If the problem persists, the installation should be checked by a Garmin dealer.

Not receiving input 
data on 429 Channel 2

No data has been received on the ARINC 429 channel 2 connection for a period exceeding 
five seconds.  If the problem persists, the installation should be checked by a Garmin dealer.

Not receiving input 
data on 232 Channel 1

No data has been received on the RS-232 channel 1 connection for a period exceeding ten 
seconds.  If the problem persists, the installation should be checked by a Garmin dealer.

OBS key stuck

The 

OBS

 Key is stuck in the enabled (or pressed) state.  Try pressing the 

OBS

 Key again to 

cycle its operation.  If the message persists, contact a Garmin dealer for assistance.

Poor GPS coverage

The GPS receiver cannot acquire a sufficient number of satellites to compute a position and 
provide navigation.

Power down and re-
initialize

The GPS 400 cannot calculate a position due to abnormal satellite conditions.  The unit is 
unusable until power has been cycled off and back on.  Abnormal satellite conditions may 
exist, an alternate means of navigation may be needed.

RAIM is not available

Receiver Autonomous Integrity Monitoring (RAIM) has determined that sufficient GPS 
satellite coverage does not exist for the current phase of flight.  (The CDI/HSI NAV flag also 
appears.)  Select an alternate source for navigation guidance.

RAIM not available 
from FAF to MAP 
waypoints

When performing an instrument approach, Receiver Autonomous Integrity Monitoring (RAIM) 
has determined that sufficient GPS satellite coverage does not exist to meet the required 
protection limits.  Select an alternate source for navigation guidance.

RAIM position warning

Although sufficient GPS satellite coverage may exist, Receiver Autonomous Integrity 
Monitoring (RAIM) has determined the information from one or more GPS satellites may 
be in error.  The resulting GPS position may be in error beyond the limits allowed for the 
current phase of flight.  Cross-check the position with an alternate navigation source.  If the 
warning occurs during a final approach segment (FAF to MAP), execute the published missed 
approach.

Scheduler message -- 
[user entered text]

The user-entered scheduler message time has expired, and the scheduler message is 
displayed.

Searching the sky

The GPS 400 is searching the sky for GPS satellite almanac data or the GPS receiver is in 
AutoLocate Mode.  Allow the unit to complete data collection (approximately five minutes) 
before turning it off.

Содержание GPS 400















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для GPS 400

Garmin GPS II+ Owner'S Manual preview
GPS II+
Бренд: Garmin Страницы: 108
Garmin GPS 35 USB Installation And Quick Start Manual preview
GPS 35 USB
Бренд: Garmin Страницы: 10
Garmin Forerunner 10 Declaration Of Conformity preview
Forerunner 10
Бренд: Garmin Страницы: 6
Garmin eTrex 10 Quick Start Manual preview
eTrex 10
Бренд: Garmin Страницы: 12
iDM EIB/KNX Technical Documentation Installation Instruction preview
EIB/KNX
Бренд: iDM Страницы: 24
Magellan eXplorist 400 - Wilderness Bundle Manual preview
eXplorist 400 - Wilderness Bundle
Бренд: Magellan Страницы: 108
ALK COPILOT LIVE 7 User Manual preview
COPILOT LIVE 7
Бренд: ALK Страницы: 56
Garmin GPSMAP 8 10 Series Owner'S Manual preview
GPSMAP 8 10 Series
Бренд: Garmin Страницы: 204
Harman Kardon GPS GPS-810 User Manual preview
GPS GPS-810
Бренд: Harman Kardon Страницы: 44
B&G CND Manual preview
CND
Бренд: B&G Страницы: 60
TRACKR bravo Reviewer'S Manual preview
bravo
Бренд: TRACKR Страницы: 8
TrackingOMAN HB-T18 User Manual preview
HB-T18
Бренд: TrackingOMAN Страницы: 4
Trackunit Kin Technical User'S Manual preview
Kin
Бренд: Trackunit Страницы: 26
TrackingTheWorld MT100 User Manual preview
MT100
Бренд: TrackingTheWorld Страницы: 16
TrackingTheWorld AVL-50 4G User Manual preview
AVL-50 4G
Бренд: TrackingTheWorld Страницы: 17
Track Your Truck Coyote EO Series Installation Manual preview
Coyote EO Series
Бренд: Track Your Truck Страницы: 2
Hobbico BIG 5 GPS METER Instruction Manual preview
BIG 5 GPS METER
Бренд: Hobbico Страницы: 4
Bushnell 364000 Quick Start Manual preview
364000
Бренд: Bushnell Страницы: 28

Бренды по названию

Популярные бренды

Загрузить еще бренды