Garmin GPS 400 Скачать руководство пользователя | Manualshive

Страница: 212 / 238

background image

GPS 400 Pilot’s Guide and Reference

190-00140-60 Rev. E

SECTION 12 – MESSAGES,

ABBREVIATIONS, & NAV TERMS

12-2

Message

Description

Approaching VNAV
proﬁle

The aircraft is within one minute of reaching the initial Vertical Navigation descent, or climb,
point.

Arrival at waypoint
[waypoint name]

The aircraft is within the arrival alarm circle for the indicated waypoint. The size of the arrival
alarm circle is deﬁned from the ‘CDI/alarms’ menu option on the Setup 1 Page.

Cannot navigate
locked FPL

The pilot has attempted to navigate a ﬂight plan (FPL) with one or more locked waypoints. A
waypoint can be ‘locked’ when the NavData Card is replaced and the waypoint(s) does not
exist in the new database.

Can’t change an active
waypoint

An attempt has been made to modify the position of the active ‘to’ or ‘from’ waypoint.
The GPS 400 does not allow modiﬁcations to user waypoints currently being utilized for
navigation guidance.

Can’t delete an active
or FPL waypoint

An attempt has been made to delete the active ‘to’ or ‘from’ waypoint. The GPS 400 does
not allow the deletion of user waypoints currently being utilized for navigation guidance.

Check unit cooling

The GPS 400 has detected excessive display backlighting temperature. The backlighting has
been automatically dimmed to reduce the temperature. Check for adequate ventilation or
check cooling air ﬂow. Contact a Garmin dealer for assistance.

Data card failure

The GPS 400 has detected a problem with the NavData Card. The data is not usable and the
card should be returned to Jeppesen or to a Garmin dealer.

Data transfer cancelled
(crossﬁll is busy)

An attempt to transfer ﬂight plan data during a unit-to-unit crossﬁll was cancelled. The host
unit is busy or unable to communicate. Wait until any previous crossﬁll operation is complete
before attempting the transfer again.

Data transfer cancelled
(data invalid)

An attempt to transfer a single user waypoint during a unit-to-unit crossﬁll was cancelled.
No waypoint was speciﬁed on the Crossﬁll Page. Select a user waypoint and attempt the
transfer again.

Data transfer cancelled
(version mismatch)

An attempt to transfer data during a unit-to-unit crossﬁll was cancelled. The database
versions of the two GPS 400s are not identical. If necessary, update the database(s) so they
match. Contact Jeppesen or a Garmin dealer for assistance.

Data transfer error,
please re-transmit

An error was detected during unit-to-unit crossﬁll of user data (user waypoints and/or ﬂight
plans). The data transfer should be attempted again.

Data transfer is
complete

The unit-to-unit crossﬁll of user waypoint data has ﬁnished.

«
...
210
211
212
213
214
...
»

Содержание GPS 400















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для GPS 400

GPSMAP 2106 - Marine GPS Receiver

Бренд: Garmin Страницы: 106

Бренд: Multilaser Страницы: 102

Бренд: WATSON INDUSTRIES Страницы: 27

aera 1900111700

Бренд: Garmin Страницы: 52

Бренд: Giant Loop Страницы: 2

Бренд: Gemini Страницы: 20

Бренд: StarGPS Страницы: 29

Бренд: CarTrek Страницы: 9

CS-TUND09 Toyota Sequoia

Бренд: CarShow Страницы: 11

Бренд: Carscop Страницы: 12

Бренд: UniGuard Страницы: 6

Бренд: AOVX Страницы: 10

Бренд: LENCO Страницы: 56

Бренд: Yi-Sheng Страницы: 10

Бренд: Becker Страницы: 86

Бренд: Jiobit Страницы: 15

Бренд: BHCnav Страницы: 34

Navigator Navigator 4

Бренд: TomTom Страницы: 57

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды