57
Reference
Main Menu:
System Tab
Map Tab —
See pages 24-26.
Sys (System) Tab —
Controls system setting for beeper, speed fi lter, languages, system mode,
simulator controls, restores factory settings, and displays software version.
The following settings are available:
• Beeper — Controls audible beep. Select from ‘Off’, ‘Alarms Only’ (sounds for alarms/messages), ‘Key
and Alarm’ (sounds for key presses and alarms/messages).
• Speed Filter — Averages speed-readings. Choose from ‘Off’, ‘Auto’ (automatically controls fi ltering), or
‘On’ (allows you to enter a value from 1 to 255 seconds).
• Language — Select from 11 languages for display on the unit.
• System Mode — Select from ‘Normal’ (Normal Navigation) or ‘Simulator’ (For practice ONLY)
When the unit is in Simulator mode, the ‘Set Options’ button will appear next to the System
Mode fi eld.
To view the ‘Set Options’ window:
1. With the unit in Simulator mode, use the
ARROW KEYPAD
to highlight the ‘Set Options’ button
and press
ENTER/MARK
.
The following settings are available in the ‘Set Options’ window of the System Tab:
• Track Control — ‘Auto Track’ will steer to the current navigation point. ‘User Track’ allows you to
enter a heading in the ‘Track’ fi eld to the right.
• Speed — Lets you enter a speed.
• Track — Lets you enter a heading.
• Set Position — Allows to set your location while in simulator mode. See page 11, starting with
step 2, for additional instructions.
The following options are available by pressing
MENU
on the System tab:
• Restore Garmin Setup — Restores ALL settings to GARMIN’s original setup values for the entire unit.
• Software Version — Displays the unit’s software and Unit ID. For registering the GPS 152, use the
printed serial number on the bottom of the unit.
Page Tab
System Tab
152 Manual Part 2.indd 57
11/27/2002, 2:56:34 PM