Garmin GPS 126 Скачать руководство пользователя страница 27

Страница: 27 / 74

Reference Waypoints (cont.)

2. Enter a waypoint name, and press

3. Highlight the ‘reference’ field, and press

4. Enter a reference waypoint name (or leave the field

blank to use your present position), and press

5. Enter the bearing and distance of your new waypoint

from the reference waypoint.

6. Press

to confirm the ‘DONE?’ prompt.

Waypoint Symbols

The GPS 126/128 allows you to select one of 16

symbols for each waypoint for easy recognition on the
map display. From the symbol page, you may also
select how the waypoint appears on the map.

To select a waypoint symbol:

1. Highlight the symbol field, and press

2. Use the arrow keypad to select the desired symbol,

and press

3. The cursor will move to the display field, where you

can select how the waypoint information will be dis-
played on the map.

4. Press

, and select one of the following display

options: ‘name with symbol,’ ‘symbol only,’ or ‘com-
ment with symbol’.

5. Press

to confirm your selection, and

again to confirm the ‘Done?’ prompt.

Waypoint Comments

Each waypoint stored in the GPS 126/128 has a

user-defined 16-character comment field. The default
comment is the UTC (or Greenwich mean time) date
and time of the waypoint’s creation.

To change or add a comment:

1. Highlight the ‘comment’ field.

2. Press

Note: You can clear the ‘comment’ field by pressing

the left side of the rocker keypad.

3. Enter the desired comment.

4. Press

Waypoint symbols enable
you to instantly get more
information about a way-
point than just its name.

REFERENCE

Waypoint

Symbols &

Comments

The waypoint comment
field will automatically
assign the date and time of
creation to the waypoint
comments field. You may
enter a 16-character user
comment at any time.

126/128 Manual (new) 6/15/98 9:51 AM Page 23

Содержание GPS 126











































































Результаты поиска

Содержание GPS 126

Отзывы:

Похожие инструкции для GPS 126

Бренды по названию

Популярные бренды

Garmin GPS 126, Руководство пользователя

Результаты поиска

Содержание GPS 126

Отзывы:

Похожие инструкции для GPS 126

Бренды по названию

Популярные бренды