Garmin GPS 126 Скачать руководство пользователя страница 50

Страница: 50 / 74

System Setup

The system setup page is used to select the operat-

ing mode, time offset, and screen preferences. The GPS
126/128 has two operating modes:

•

Normal Mode

operates the unit using satellite

tracking information.

•

Simulator Mode

allows you to operate the unit

without acquiring satellites, and is ideal for prac-
ticing or entering waypoints and routes while at
home.

To select an operating mode:

1. Highlight the ‘mode’ field, and press

2. Select a mode, and press

Date and Time Setup

The date and time is located directly below the

mode field.

Note: Date and time information is derived from the

GPS satellites and cannot be changed by the user.

Because the time shown is UTC time (Greenwich

mean time), you will need to enter a time offset to dis-
play the correct local time for your area. To determine
the time offset for your area, note your position and
refer to the chart in Appendix D.

To enter the time offset:

1. Highlight the ‘offset’ field, and press

2. Enter the time offset, and press

Note: Move the cursor to the left to change the plus

or minus sign.

Time Format

The time display shown on the system setup and

Position Pages may be set to display the time in a 12- or
24-hour format.

To select the time format:

1. Highlight the ‘hours’ field, and press

2. Select 12- or 24-hour display, and press

System Setup,

Date/Time &

Time Format

REFERENCE

The GPS 126/128’s two
operating modes are
accessed through the sys-
tem setup submenu.

To display the correct
local time, you must enter
the appropriate offset
from the chart at the end
of Appendix C.

126/128 Manual (new) 6/15/98 9:51 AM Page 46

Содержание GPS 126











































































Результаты поиска

Содержание GPS 126

Отзывы:

Похожие инструкции для GPS 126

Бренды по названию

Популярные бренды

Garmin GPS 126, Руководство пользователя

Результаты поиска

Содержание GPS 126

Отзывы:

Похожие инструкции для GPS 126

Бренды по названию

Популярные бренды