Garmin GPS 126 Скачать руководство пользователя страница 58

Страница: 58 / 74

Installation

APPENDIX B

Mounting the GPS 126

The GARMIN GPS 126 should be mounted in an

exposed location with an unobstructed view of the sky.
The unit comes with a gimbal bracket that can be used
to surface mount the unit. When choosing a location
for the display unit, make sure you consider the follow-
ing conditions:

• There should be at least 2” (5 cm) clearance

behind the case to allow connection of the
power/data cable.

• The mounting surface should be rigid enough to

support the unit and protect it from excessive
vibration and shock.

• The built in antenna has an unobstructed view of

the sky.

To surface mount the GPS 126:

1. Place the mounting bracket in the desired location.

2. Mark and drill the four mounting holes for the fasten-

ers you are using (not included).

3. Fasten the bracket to the surface using the appropri-

ate fasteners.

4. Insert the GPS 126 into the mounting bracket.

5. Screw the two mounting knobs through the bracket

and into the GPS 126.

6. Connect the power/data cable to the back of the unit,

making sure the locking ring is engaged.

126/128 Manual (new) 6/15/98 9:52 AM Page 54

Содержание GPS 126











































































Результаты поиска

Содержание GPS 126

Отзывы:

Похожие инструкции для GPS 126

Бренды по названию

Популярные бренды

Garmin GPS 126, Руководство пользователя

Результаты поиска

Содержание GPS 126

Отзывы:

Похожие инструкции для GPS 126

Бренды по названию

Популярные бренды