APPENDIX
C
SIMULATOR
Entering an initial position reference.
Database Confirmation Page
To enter an initial position reference by waypoint identifier:
1. Rotate
O
to highlight the waypoint identifier field.
2. Use
K
and
O
to spell out the identifier of the desired airport, navaid or user waypoint.
3. Press
E
to confirm the identifier. The waypoint confirmation page will appear, display-
ing the waypoint’s position.
4. Press
E
to confirm the ‘ok?’ prompt.
The position page will now appear, and you may now use most of the GNC
250XL navigation features for practice and planning. You’ll also receive a ‘Do not use
for nav’ message to remind you that the simulator mode should never be used for
actual navigation. During simulator operation, you will be able to enter a ground
speed from the CDI page, and define a course to a destination from the direct-to con-
firmation page. Altitude may only be entered by using the VNAV function available
from the NAV menu 1 page (see page 26).
To enter a ground speed from the CDI page:
1. Press
N
and rotate
O
to display the CDI page.
2. Press
C
twice to activate the cursor in the GPS window.
3. Rotate
O
to highlight the ground speed field.
4. Use
K
and
O
to enter the desired speed. Press
E
to accept, and
C
to finish.
To exit the simulator mode, the GNC 250XL must be turned off by rotating the
B
knob counter-clockwise until the unit shuts down. All waypoints and routes creat-
ed in simulator mode will be retained in the GNC 250XL’s internal memory.
91
250xl manual 2 7/17/98 1:33 PM Page 91
