Garmin GMU 44, Руководство по установке

Страница: 112 / 120

Page A-16 G300 Installation Manual – Pinouts
Revision A 190-00921-01
A.3.9 Frequency Counter Inputs
Digital signals are updated to the display at a rate of 10 times per second (10 Hz). Digital inputs are low
when the signal is
≤ 2 Vdc or the resistance to ground is ≤ 375 Ω , and high when the signal is > 3.5 Vdc
or the resistance to ground is > 100 k Ω . Digital inputs can also be configured as discrete inputs.
Pin Connector Pin Name I/O
17 P732 FREQUENCY COUNTER IN* 1 IN
19 P732 FREQUENCY COUNTER IN* 2 IN
36 P732 FREQUENCY COUNTER IN* 3 IN
38 P732 FREQUENCY COUNTER IN* 4 IN
* Indicates Active Low
The following table lists the minimum frequency, maximum frequency, and duty cycles for each of these
inputs.
Pin Name Minimum Frequency Maximum Frequency Duty
Cycle
FREQUENCY COUNTER IN* 1 1 Hz 950 Hz 50%
FREQUENCY COUNTER IN* 2 1 Hz 100 KHz 50%
FREQUENCY COUNTER IN* 3 1 Hz 100 KHz 50%
FREQUENCY COUNTER IN* 4 1 Hz 100 KHz 50%
A.3.10 Fuel Select Outputs
Pin Connector Pin Name I/O
76 P732
RESERVED (FUEL SENSOR PULL-UP 2
(ANALOG IN 15))
OUT
77 P732
RESERVED (FUEL SENSOR PULL-UP 1
(ANALOG IN 14))
OUT