Garmin GMU 44, Руководство по установке

Страница: 111 / 120

G300 Installation Manual – Pinouts Page A-15
190-00921-01 Revision A
Pin Connector Pin Name I/O
47 P732 ANALOG IN 22 HI
IN
67 P732 ANALOG IN 22 LO
IN
28 P732 ANALOG IN 23 HI
IN
8 P732 ANALOG IN 23 LO
IN
27 P732 ANALOG IN 24 HI
IN
7 P732 ANALOG IN 24 LO
IN
66 P732 ANALOG IN 25 HI
IN
46 P732 ANALOG IN 25 LO
IN
70 P732 ANALOG/CURRENT MONITOR IN 1 HI
IN
50 P732 ANALOG/CURRENT MONITOR IN 1 LO
IN
48 P732 ANALOG/CURRENT MONITOR IN 2 HI
IN
68 P732 ANALOG/CURRENT MONITOR IN 2 LO
IN
10 P732 THERMOCOUPLE REF IN HI
IN
9 P732 THERMOCOUPLE REF IN LO
IN
A.3.8 Temperature Inputs
Temperature input is used for Outside Air Temperature (OAT) computations. The temperature input is a
three-wire temperature probe interface. OAT Power Out and OAT High are connected internally at the
OAT probe. A GTP 59 or other supported temperature probe is required for the GSU 73 installation. The
GTP 59 is a Resistive Temperature Device (RTD). Refer to Figure C-1 for the temperature probe
interconnect.
Pin Connector Pin Name I/O
15 P732 OAT PROBE IN HI IN
16 P732 OAT PROBE POWER OUT OUT
35 P732 OAT PROBE IN LO IN