Garmin G1000H, Руководство пилота

Страница: 66 / 542

Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
190-01255-00 Rev A 54
FLIGHT INSTRUMENTS
A Baro Transition Alert is provided to alert the pilot to change the barometric pressure setting when crossing
the transition altitude in either direction. This is displayed by the flashing light blue barometric pressure setting
when crossing the transition altitude.
Setting the Baro Transition Alert:
1) Use the
FMS
Knob to select the AUX - System Setup Page on the MFD.
2)
Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight Altitude in the Baro Transition Alert box.
4) Turn the small
FMS
Knob to turn the alert OFF or ON and press the
ENT
Key.
5)
Turn the small FMS Knob to change the altitude and press the ENT Key.
6) To cancel the selection, press the FMS Knob.
Figure 2-11 Baro Transition Alert
(AUX - System Setup Page)
VERTICAL SPEED INDICATOR (VSI)
The Vertical Speed Indicator (VSI) displays the aircraft vertical speed on a fixed scale with labels at 1000,
2000, and 3000 fpm (Figure 2-12). Digits appear in the pointer when the climb or descent rate is greater than
100 fpm. If the rate of ascent/descent exceeds 3000 fpm, the pointer appears at the corresponding edge of the
tape and the rate appears inside the pointer.
A magenta chevron is displayed as the Required Vertical Speed Indication (RVSI) for reaching a VNV Target
Altitude once the “TOD [Top of Descent] within 1 minute” alert has been generated. See the Flight Management
Section for details on VNV features, and refer to Section 2.2, Supplemental Flight Data, for more information
about VNV indications on the PFD.