Garmin G1000H Скачать руководство пользователя страница 246

Страница: 246 / 542

Garmin G1000H

™

Pilot’s Guide for the Bell 407GX

190-01255-00 Rev. A

234

FLIGHT MANAGEMENT

Viewing available departures at an airport:

From the Airport Information Page (first page in the WPT group), select the

Softkey. The Departure Information

Page is displayed, defaulting to the airport displayed on the Airport information Page.

To select another airport, press the

FMS

Knob to activate the cursor, enter an identifier/facility name/city, and

press the

ENT

Key.

Turn the large

FMS

Knob to highlight the Departure. The departure is previewed on the map.

Turn the small

FMS

Knob to view the available departures. Press the

ENT

Key to select the departure. The cursor

moves to the Runway box. The departure is previewed on the map.

Turn the small

FMS

Knob to view the available runways. Press the

ENT

Key to select the runway. The cursor

moves to the Transition box (only if there are available transitions). The departure is previewed on the map.

Turn the small

FMS

Knob to view the available transitions. Press the

ENT

Key to select the transition. The cursor

moves to the Sequence box. The departure is previewed on the map.

Select the

INFO-x

Softkey to return to the Airport Information Page.

REMOVING A DEPARTURE FROM THE ACTIVE FLIGHT PLAN

When plans change while flying IFR, departures can be easily removed from the Active Flight Plan.

Removing a departure procedure from the active flight plan:

Press the

FPL

Key to display the Active Flight Plan Page (MFD) or the Active Flight Plan Window (PFD).

Press the

MENU

Key, and highlight ‘Remove Departure’.

Press the

ENT

Key. A confirmation window is displayed listing the departure procedure.

With ‘OK’ highlighted, press the

ENT

Key. To cancel the removal request, highlight ‘CANCEL’ and press the

ENT

Key.

Press the

FPL

Key to display the Active Flight Plan Page (MFD) or the Active Flight Plan Window (PFD).

Press the

FMS

Knob, and turn to highlight the departure header in the active flight plan.

Press the

CLR

Key. A confirmation window is displayed listing the departure procedure.

With ‘OK’ highlighted, press the

ENT

Key. To cancel the removal request, highlight ‘CANCEL’ and press the

ENT

Key.

Press the

FMS

Knob to remove the flashing cursor.

Содержание G1000H































































































































































































































































































































































































































































































































































Результаты поиска

Содержание G1000H

Отзывы:

Похожие инструкции для G1000H

Бренды по названию

Популярные бренды

Garmin G1000H, Руководство пилота

Результаты поиска

Содержание G1000H

Отзывы:

Похожие инструкции для G1000H

Бренды по названию

Популярные бренды