Garmin G1000:Socata, Руководство пилота

Страница: 377 / 542

190-00709-00 Rev. A
Garmin G1000 Pilot’s Guide for the Socata TBM 850
6-77
HAZARD AVOIDANCE
OPERATION
NOTE:
The KTA 870 automatically transitions from STANDBY to OPERATE mode upon takeoff.
The unit must be in operating mode for traffic to be displayed. The ability to switch from standby to operating
mode on the ground is especially useful for scanning the airspace around the airport before takeoff.
Selecting the STANDBY Softkey forces the unit into Standby Mode. Selecting the NORMAL Softkey allows
the KTA 870 to switch from Operating Mode to Standby Mode as necessary.
Switching from standby mode to operating mode:
On the Traffic Page, select the NORMAL Softkey
Or :
1) Press the
MENU
Key and turn the small
FMS
knob to select Normal Mode.
2) Press the ENT Key to place the KTA 870 in the operating mode.
Switching from operating mode to standby mode:
On the Traffic Page, select the
STANDBY
Softkey
Or
:
1) Press the MENU Key and turn the small FMS
knob
to select Standby Mode.
2) Press the
ENT
Key to place the KTA 870 in the Standby mode.
System Self Test
1)
Set the range to 2/6 nm.
2) Select the TEST Softkey.
3) Self test takes approximately eight seconds to complete. When completed successfully, traffic symbols are
displayed and a voice alert “TAS System Test Passed” is heard. In the event that the system test fails, the system
reverts to Standby Mode and a voice alert “TAS System Test Failed” is heard.
Displaying traffic on the Traffic Map Page:
1)
Turn the large
FMS
Knob to select the Map Page Group.
2) Turn the small FMS
Knob
to select the Traffic Map Page.
3) Select the
NORMAL
Softkey to begin displaying traffic. OPERATING is displayed in the Traffic mode field.
4) Select the
ALT MODE
Softkey to change the altitude volume.
5) Select the STANDBY Softkey to place the system in the Standby mode. STANDBY is displayed in the Traffic
mode field.
6) Turn the
RANGE
Knob clockwise to display a larger area or counter-clockwise to display a smaller area.